滨特尔集团简介 滨特尔集团是一家**的水处理解决方案供应商, 总部位于英国的曼彻斯特。在**25个国家有120多个工厂和分支机构,现有员工9500人,年营业额约30亿美元。 君格于2007年加入滨特尔集团,以其的民用和市政污水泵站系统,进一步完善了滨特尔的产品线。同样隶属于滨特尔集团的Sta-Rite公司,在德国市场提供家用及公园用清水泵。 滨特尔公司以其包括泵、过滤设备器到系统方案的完整产品线,支持着水处理、供水及排水工程的每一步建设。无论是地下水或者雨水,海水或者湖泊水,滨特尔致力于将的水处理技术和服务传播到世界上每一个水质需要改善的地方。 尤其是在世界很多地方,人们备受缺水之困扰,滨特尔努力让人们在家庭中、工业以及社区中用上安全、洁净、高质量的水。 清洁的水是我们宝贵的资产。滨特尔将不断创新,寻求的解决方案。 潜污泵 对应于不同的介质和应用,君格有多种同系列的潜污泵,其均可实现安全的干运转。将水泵安装在集水箱内时,建议使用我们的导轨系统。我们水泵产品的供货范围广泛,有大量的备件以及控制单元,并可提供各种类型的地上型或地埋式的集水箱。 COMPLI 1000 是双泵系统污水提升装置,适合安装在任何需要额外安全**的地点。 PE储罐容积约为115升 进口法兰DN100/DN150 地面距进口中心距离可调 扬程20m 流量76m3/h Compli 1000是双泵污水排放单元之一,可以安装在任何需要确保污水安全排放的地点。在某些情况下,当地会要求在饭店,休闲中心等公共场所必须安装双泵系统。标准的配置包括组合摇摆式止回阀,因此*另外安装“Y”型管。 COMPLI 310 E DRENA-LINE Sewage lifting station Single unit for small domestic units PE-tank, capacity appr. 50 L Inlet flange DN 100 Inlet height 180 mm Hmax = 8 m Qmax = 29 m3/h The compli 310 E is the smallest sewage lifting station of our compli series. It has been designed for the disposal of sewage from housing units like basement dwellings. The compli 310 E is all-purposed, due to compact dimensions of its tank and numerous connection facilities. The low weight and the plug with integrated control board ensures a facile installation, so that an electrician is not needed to start running the unit. The submersible unit permits a general application in rooms which could be flooded. The connector housing with integrated control unit must be installed in rooms which are well ventilated and cannot be flooded. The powerful alternating current motor of the compli 310 E is based on a rugged grey cast iron volute housing vat which grant a special stability and quiet running. COMPLI 400 适合排放单个住宅的污水 PE储罐 容积约为64升 进口法兰DN 100 地面距进口中心距离250(180)毫米 扬程7m 流量48m3/h Compli 400是为单个住宅的污水处理而设计的。为了方便使用和维修,它可以直接安装在地下室的地面上或者放置在污水坑内。控制单元已和泵连接好。一个额外的进口可排放其他设备产生的污水,如淋浴器,洗衣机或者水槽。Compli 400使用持久耐用的材料:不锈钢的轴和聚乙烯储罐。